The XRD equipment available in E&T building room C164A is as follows:
Bruker D2 Phaser (Gen2) Benchtop X-ray Diffractometer
The D2 PHASER is a portable desktop XRD instrument for all X-ray powder diffraction applications in Bragg-Brentano geometry for research and quality control. It is for instance possible to investigate crystal structures applying the fundamental parameters approach in the TOPAS software, nano-structures for fast and reliable SAXS measurements, or micro-structures (crystallite size).
-
X-ray source: Cu low power load tube
-
X-ray generation: 30kV / 10mA
-
Goniometer: Theta / Theta
-
Max. usable angular range: -3° to 160° 2 Theta
-
Angular accuracy: 0.02°
-
Detectors: SSD160-2 Si Strip 160 channel
-
Sample stages: Single or 6-position, rotating
-
Built-in Integrated PC and monitor
Leybold Didactic X-ray apparatus
Fully-featured, microprocessor-controlled device with x-ray tube and goniometer designed for conducting a wide variety of experiments in x-ray physics. The high-voltage system, x-ray tube, and experiment chamber are all within a radiation-proof housing. Two large displays show all relevant information on the current experiment.
-
School type X-ray apparatus with full protection
-
Interchangeable X-ray tube: Cu, Mo.(Options: Fe, Ag, W, Au)
-
Dose rate: 10 cm distance: < 1 µSv/h
-
Tube high voltage: 0.0 to 35.0 kV
-
Tube current: 0.0 .to 1.0 mA
-
Step size: 0.1° minimum
-
Exposure timer: Gate time 0.5 s to 9999 s
-
Analog output ANGLE proportional to scanning angle